The use of SMT  Splice Tape is a new generation of electronic assembly technology, it will be the traditional electronic components compressed into a volume of only a few tenths of the device, thus achieving the electronic product assembly of high density, high reliability, miniaturization, low cost, and production automation. This miniaturized component is called: SMY device (or SMC, chip device). The process of assembling the components onto the printing (or other substrate) is called the SMT process. Related assembly equipment is called SMT equipment. At present, advanced electronic products, especially in the computer and communications electronics, has been widely used SMT technology. International SMD device production increased year by year, while the traditional device output decreased year by year, so with the progress of the interchange, SMT technology will become increasingly popular. It is the current electronic assembly industry, the most popular a technology and technology. SMT features: high assembly density, electronic products, small size, light weight, the size and weight of the chip components only the traditional cartridge components around 1/10, the general use of SMT, the electronic product volume reduced by 40% to 60% Reduce 60% to 80%. High reliability, strong anti-vibration ability. Poor solder joint defect rate. High frequency characteristics. Reduced electromagnetic and RF interference. Easy to achieve automation, improve production efficiency. Reduce the cost of 30% to 50%. Saving materials, energy, equipment, manpower, time and so on.

(For 8mm, 12mm, 16mm, 24mm, 32mm with): 1, four with piece of material: the general with the feeder clamp, then use the material to use copper buckle, the use of materials, Skilled operation of the staff can also not directly with the accessory clamp with four pieces of tape with adhesive tape. 2, double-sided material belt, the use of both sides of the material and the ribbon with the row of holes corresponding to the yellow material with the tape on the film corresponding to complete, so as to paste, 3, special materials (more series), SMT Double-sided film for 8mm, 12mm, 16mm, 24mm ... ... through the use of conveyor belt, SMT business can bring some advantages: 1, is a great increase in production efficiency, if the stop material, every time spent The time is about 2 minutes, this is still fast, a machine running a minute count 8 yuan, which wastes 2 * 8 = 16 yuan; if the belt with the need to save this time, the cost of two pieces of material With only 0.4 yuan. 2, is a great way to avoid waste of material: to avoid the material is too short and can not use the machine ... SMT  splice tape