SMT single (double )splice tape


SMT double splice tape

  SMT picking belt series: picking products are mainly four series (for 8mm, 12mm, 16mm, 24mm, 32mm with):

  1, four with piece of material: with the general clutch, access material copper buckle use, the operation of skilled employees can also be used without access to the clamp and directly with the four sides of the film with adhesive tape.

  2, double-sided material belt, with the material on both sides of the belt and the material of the row of holes corresponding to the yellow material with the material on the tape corresponding to the film, so paste,

 3, special picking belt (multi-series), SMT double-sided film for 8mm, 12mm, 16mm, 24mm ... ...

Through the use of material belt, SMT business can bring some advantages:

 1, is a great increase in production efficiency, if the downtime pick up, each time spent about 2 minutes, this is still fast, a machine running a minute count 8 yuan, which wastes 2 * 8 = 16 Yuan; if the belt with the need to save this time, spent two pieces with only 0.4 yuan.

 2, is a great way to avoid waste of material: to avoid the material is too short and can not be used on the machine.

Advantage:

 1 does not require auxiliary tools

 2. Improve process efficiency

 3. Easy to operate, save labor

 4. High reliability and high precision

 5. Completely use the remaining material.

上一篇:WhatisSMTsteelmeshindustrywipe...
下一篇:SMTsteelmeshwipeswitheightproc...

分享到