SMT double splice tape




Shenzhen Kande Wei Electronics Co., Ltd

Contact: Mr. Guo

Tel: 86-755-29568080

Mobile: 13537561678

E-mail: SMT1678@163.COM

Fax: 86-755-29557786



Address: Longhua District of Shenzhen City Guanlan streets and 573, 2nd Floor

SMT picking belt for the role of enterprises

Your current location: Home >> News >> Industry News

SMT picking belt for the role of enterprises

Release date:2017-04-07 The author: Click on:

SMT special splice tape

  SMT picking belt for the role of enterprises

  1, is a great increase in production efficiency, if the downtime pick up, each time spent about 2 minutes, this is still fast, a machine running a minute count 8 yuan, which wastes 2 * 8 = 16 Yuan; if the belt with the need to save this time, spent two pieces with only 0.4 yuan.

  2, is a great way to avoid waste of material: to avoid the material is too short and can not be used on the machine and discard, can all use the remaining materials.

  3, is to reduce the machine Feida and other mechanical losses; reduce the machine frequently stop, open, to avoid flying up frequently and other movements, can extend its service life.

  4, is to avoid some of the switch cover may cause human accidents.

(M-ESD), bright black - anti-static (G-ESD), transparent green - anti-static (L-), anti-static (M-ESD) ESD).

Picking products series

(For 8mm, 12mm, 16mm, 24mm, 32mm):

 1, single-sided material belt (multi-type): the general with the feeder clamp, access material copper buckle use, skilled operation of the staff can not use the clamp and directly with the four sides of the tape with adhesive tape, this price relative Cheap.

 2, double-sided belt (multi-series) (single, bilateral hole positioning), the use of both sides of the material and the ribbon with the row of holes corresponding to the yellow material with the tape on the film corresponding to complete, to paste, Moderate

 3, all-round belt (multi-series), so that the material becomes more reasonable, fast; three side-type belt (Panasonic) to change the Panasonic machine can not renew the history of the electronics manufacturing enterprises to create more interest.

 4, special picking belt (multi-series),

  5, automatic feeding with automatic feeder for the material, a manual material for a 30-60 seconds, automatic material only 6 seconds, greatly improving the production efficiency.

SMT double-sided film for 8mm, 12mm, 16mm, 24mm [2]

SMT picking with the first brand, Shenzhen, a Electric Industrial Co., Ltd. to provide you with one-stop solution. For you to enhance efficiency, we have been adhering to the principle.

   Strict management and requires the speed of the production of SMT processing plants, the use of SMT non-stop continued to pick up the tape, is a best choice! Can achieve non-stop refueling, improve production efficiency of about 15%, and quality and cheap, comprehensive investment return greater than 500%.

Related tags:SMTspecialsplicetape

Recently Viewed:

SMT Stencil cleaning roll

Please enter the message here。
Contact person